This is a rebroadcast of OICs webinar panel. In this deep dive discussion, Frank Fahey (representing...
How Delta Affects Option Profits
08/26/2011 6:00 am EST
This review of how the option “Greek” Delta affects the underlying equity can help traders better measure risk on both long and short option positions.
This article takes a closer look at Delta as it relates to actual and combined positions—known as position Delta—which is a very important concept for option sellers. Below is a review of the risk measure Delta, and an explanation of position Delta, including an example of what it means to be position-Delta neutral.
See video: Delta-Neutral Option Trading
Let’s review some basic concepts before jumping right into position Delta. Delta is one of four major risk measures used by option traders (called “Greeks”). Delta measures the degree to which an option is exposed to shifts in the price of the underlying asset (i.e. stock) or commodity (i.e. futures contract). Values range from 1.0 to –1.0 (or 100 to –100, depending on the convention employed).
See related: Know Your Option “Greeks”
For example, if you buy a call or a put option that is just out of the money (i.e. the strike price of the option is above the price of the underlying if the option is a call, and below the price of the underlying if the option is a put), then the option will always have a Delta value that is somewhere between 1.0 and –1.0. Generally speaking, an at-the-money option usually has a Delta at approximately 0.5 or -0.5.
Figure 2 below contains some hypothetical values for S&P 500 call options that are at, out, and in the money (in all these cases, we will be using long options). Call Delta values range from 0 to 1.0, while put Delta values range from 0 to –1.0.
As you can see, the at-the-money call option (strike price at 900) in Figure 2 has a 0.5 Delta, while the out-of-the-money (strike price at 950) call option has a 0.25 Delta, and the in-the-money (strike at 850) has a Delta value of 0.75.
Keep in mind, these call Delta values are all positive because we are dealing with long call options, a point to which we will return later. If these were puts, the same values would have a negative sign attached to them. This reflects the fact that put options increase in value when the underlying asset price falls. (An inverse relationship is indicated by the negative Delta sign.)
You will see below that when we look at short option positions and the concept of position Delta, the story gets a bit more complicated.
Article Continues on Page 2|pagebreak|
At this point, you might be wondering what these Delta values are telling you. Let’s use the following example to help illustrate the concept of simple Delta and the meaning of these values. If an S&P 500 call option has a Delta of 0.5 (for a near or at-the-money option), a one-point move (which is worth $250) of the underlying futures contract would produce a 0.5 (or 50%) change (worth $125) in the price of the call option.
A Delta value of 0.5, therefore, tells you that for every $250 change in value of the underlying futures, the option changes in value by about $125. If you were long this call option and the S&P 500 futures move up by one point, your call option would gain approximately $125 in value, assuming no other variables change in the short run. We say "approximately" because as the underlying moves, Delta will change as well.
Be aware that as the option gets further in the money, Delta approaches 1.00 on a call and -1.00 on a put. At these extremes, there is a near or actual one-for-one relationship between changes in the price of the underlying and subsequent changes in the option price. In effect, at Delta values of -1.00 and 1.00, the option mirrors the underlying in terms of price changes.
Also keep in mind that this simple example assumes no change in other variables like the following:
- Delta tends to increase as you get closer to expiration for near- or at-the-money options
- Delta is not a constant, a concept related to Gamma (another risk measurement), which is a measure of the rate of change of Delta given a move by the underlying
- Delta is subject to change given changes in implied volatility
Long vs. Short Options and Delta
As a transition into looking at position Delta, let’s first look at how short and long positions change the picture somewhat. First, the negative and positive signs for values of Delta mentioned above do not tell the full story.
As indicated in figure 3 below, if you are long a call or a put (that is, you purchased to open these positions), then the put will be Delta negative and the call Delta positive; however, our actual position will determine the Delta of the option as it appears in our portfolio. Note how the signs are reversed for short put and short call.
The Delta sign in your portfolio for this position will be positive, not negative. This is because the value of the position will increase if the underlying increases. Likewise, if you are short a call position, you will see that the sign is reversed. The short call now acquires a negative Delta, which means that if the underlying rises, the short call position will lose value. This concept leads us into position Delta.
Position Delta can be understood by reference to the idea of a hedge ratio. Essentially, Delta is a hedge ratio because it tells us how many options contracts are needed to hedge a long or short position in the underlying.
For example, if an at-the-money call option has a Delta value of approximately 0.5—which means that there is a 50% chance the option will end in the money and a 50% chance it will end out of the money—then this Delta tells us that it would take two at-the-money call options to hedge one short contract of the underlying.
In other words, you need two long call options to hedge one short futures contract. (Two long call options x Delta of 0.5 = position Delta of 1.0, which equals one short futures position). This means that a one-point rise in the S&P 500 futures (a loss of $250), which you are short, will be offset by a one-point (2 x $125 = $250) gain in the value of the two long call options. In this example, we would say that we are position-Delta neutral.
By changing the ratio of calls to number of positions in the underlying, we can turn this position Delta either positive or negative. For example, if we are bullish, we might add another long call, so we are now Delta positive because our overall strategy is set to gain if the futures rise. We would have three long calls with Delta of 0.5 each, which means we have a net-long position Delta by 0.5.
On the other hand, if we are bearish, we could reduce our long calls to just one, which would now make us net-short position Delta. This means that we are net-short the futures by -0.5.
The Bottom Line
To interpret position-Delta values, you must first understand the concept of the simple Delta risk factor and its relation to long and short positions. With these fundamentals in place, you can begin to use position Delta to measure how net-long or net-short the underlying you are when taking into account your entire portfolio of options (and futures). Remember, there is risk of loss in trading options and futures, so only trade with risk capital.
By John Summa, contributor, Investopedia.com
John Summa is a CTA and founder of HedgeMyOptions.com
Related Articles on OPTIONS
Roma Colwell-Steinke of CBOEs Options Institute joins Joe Burgoyne in a conversation about strategy ...
This is a rebroadcast of OIC’s webinar panel where you can take a deep dive into options Greek...
Host Joe Burgoyne answers listener questions about mini-options and investor resources. Then on Stra...